You are here:

Surface mounted intumescent fire & fire/smoke seals

Product 69

69-Surface_mounted_seal

Adhesive intumescent seals which are surface-mounted onto doors and door frames, sealing off fire and smoke

£0.00 ex. Vat

  • Ensure you select the correct option when ordering. See order sizes for more information.

Description

Intumescent Fire Seals

Intumescent fire seals, a surface-mounted intumescent fire or fire and smoke seal. No routing is necessary.

  • Supplied as a pack with intumescent paper for use around the lock and hinge areas.
  • Also supplied with two labels printed Fire Door – Keep Shut. 
  • Fitted to door frames in minutes. A 3½mm or greater gap down the closing stile and across the door head is all that is required.
  • Seals fit directly over hinges with no hinge bind and no special gap is necessary on the hinge side.
  • Can paint the face seal once fitted, however, do not paint the brush smoke seal.
  • If the brush seal is painted in error, it is easy to replace.

The surface-mounted seals have been successfully used for over 25 years.

Available in either black, brown, red, white, or wood veneer finishes and an alternative plain seal without brush seal to allow smoke detectors to be activated.

Tested to BS476 Part 22 (1987), achieving integrity of up to 66 minutes with an 11mm gap at the head of the door. The intumescent strips included have also been successfully tested to BS476 Part 23 (1987).

Fire door seals help to protect property from not only fire, but also, smoke, acoustics, drafts, and weather. Browse our full range of Fire Door Seals online.

Advantages

– Provide up to 66 minutes of fire protection- Seals fit directly over hinges with no hinge bind. No gap is necessary on hinge side
– Once fitted the face of the seal can be painted, although the brush smoke seal must not be painted

Application Instructions

Peel off backing paper from the self-adhesive fixing strip starting on the brush side and, with the smoke
seal touching the door stop, press the intumescent seal into position. The seal can be easily cut with a
sharp knife to fit around lock areas. Two 1100mm lengths are supplied for fitting down the closing stile
and these are 2.4mm thick. One 1000mm long x 2.4mm thick strip is supplied for the head of the door
frame. Two 1100mm long strips (1mm thick in standard version and 2.3mm thick in plastic version) are
supplied for the back of the door frame, and these adhere from top to bottom, over the hinges (this
helps to cool the hinges and screws in a fire). Intumescent paper is supplied for application around a
rebated lock, to cool the lock in a fire. Remove lock from door, cut Envirograf® intumescent paper to
size, wrap it around lock and sandwich it between the lock and door as you replace the lock. Also place
paper under the keep plate. Labels are supplied for single or double doors, printed “Fire Door – Keep
Shut”. These seals comply with BS476 Part 22. The intumescent seals can be painted or varnished over
but the brush must not be painted. If the brush is accidentally painted over it can be easily replaced by
ordering Envirograf® Product 72 brush seals as replacements. Note: panel pins are supplied to secure
through the brush smoke seal at each end and every 300mm apart along its length. These panel pins
must be fitted as requested by building control officers and fire officers.

Case Studies

  • Ace results for Cherrywood

    Door upgrading products used in  Paladian style Stanmer House in East Sussex.

  • Protecting Abbey House Nursing Home

    Staircase protected with motorised drop curtain at Abbey House nursing home in Grimsby.

  • Priceless protection at Thornham Parva Church

    Protecting the unique oak retable at Saint Mary’s Church.

Order References / Sizes

REF                                        TYPE                                      COLOUR                                                                                     

ES/SDS                                 Single door set                     Brown, white, red, black

ES/SDW                                Single door set                     Real wood veneer, oak, sapele, ash

ES/DDS                                 Double door set                   Brown, white, red, black

ES/DDW                                Double door set                   Real wood veneer, oak, sapele, ash

If seals are required not in packs but in single lengths;

 

REF                                                                                        COLOUR                                                                                 

For the head (1000mm long) and the closing stile (1100mm long)

ES/25/HS                                                                              Coloured

ES/25/HS/W                                                                          Wood finish

 

For down hinge stile (1100mm long)

ES/30/PS                                                                               Coloured

ES/30/PS/W                                                                          Wood finish

Other wood finishes available

 

ES/SDS/P

A plastic holder for surface mounting with intumescent on face and corner blade for the stop, giving both fire and smoke sealing. This is ideal for larger gaps and buckled doors. Very quick to fit in brown, white and black. Complete with lock paper and keep shut signs. * DDS/P is supplied with a brush seal for the meeting stiles.

 

REF                                        TYPE                                      COLOUR                                                                                    

ES/SDS/P                              Single door set                     Brown, white, red, black

ES/SDW/P                             Single door set                     Real wood veneer, oak, sapele, ash

ES/DDS/P                             Double door set                   Brown, white, red, black

ES/DDW/P                            Double door set                   Real wood veneer, oak, sapele, ash

 

 

Plain seals without brush seal to allow smoke detectors to be activated.

 

REF                                        TYPE                                      COLOUR                                                                                

NS/SDS                                 Single door set                     Brown, white, red, black

NS/SDW                                Single door set                     Veneers

NS/DDS                                 Double door set                   Brown, white, red, black

NS/DDS/W                            Double door set                   Veneers

 

If plain seals without brush seal are required not in packs but in single lengths;

 

REF                                                                                        COLOUR                                                                                       

For the head (1000mm long) and the closing stile (1100mm long)

NS/25/HS                                                                              Coloured

NS/25/HS/W                                                                         Wood finish

 

For down hinge stile (1100mm long)

NS/30/PS                                                                              Coloured

NS/30/PSW                                                                           Wood finish

 

Related Products