Description
A surface-mounted, 2100mm long smoke, retrofit acoustic seal holder with a standard anodised aluminium finish. Suited for doors as well as windows to provide acoustic, smoke, weather and draught protection. Also available in plastic, in white, brown or black as standard. The holder is able to accommodate various smoke seals, including brushes, acoustic tubes and angled or straight rubber blades. See also our range of seals.
Advantages
– Gives full acoustic, draught, smoke and weather protection
– Can be fitted onto door frames or down the centre stiles of doors
– Can be fitted around casement or sash windows and glass doors
– Can also be used to provide protection around glass doors
Application Instructions
To fit the self-adhesive seal, simply peel off the backing material to reveal the adhesive tape and press to the door frame where required. Secure with the panel pins supplied by fixing at each end and then at 300mm intervals along the length of the seal.
Order References / Sizes
Smoke seal holders
Ref Description Length
ES/SH Anodised aluminium holder with seal 2100mm
ES/SP PVC holder 2100mm
Smoke, draught, acoustic and weather seals
Simply add the following suffixes to the above seal holder references, making sure to specify required seal size.
Ref Seal type Sizes
/B Brush 5mm, 7mm, 10mm
/T Tubular rubber 6mm, 9mm
/A Angled rubber 6mm, 9mm
/S Straight rubber 5mm, 7mm, 9mm
/V Rubber “V” 6mm
Please note: Brush and rubber seals are embedded approximately 1-1.5mm into the holder, so they will protrude 1-1.5mm less into the opening (i.e. a 5mm seal will actually protrude 3.5-4mm only). Please bear this in mind when specifying this product.