You are here:

Firoblok for Ventilation Ducting

Product 110

110-firoblok-for-ventilation-ducting

Intumescent fire protection sleeves to protect ventilation ducting

£0.00 ex. Vat

    • £
    • 7.54 £
    • 9.8 £
    • 11.4 £
    • 9.8 £
    • 11.5 £
    • 21.13 £

Description

Fire protection for ducting and ventilation systems which pass through fire-rated block, brick, concrete or plasterboard, both internally and externally. Specialised sleeves designed for electrical conduits are also available in this range.

In the case of a fire, the intumescent material will expand, thus sealing the gap and preventing firespread. They also absorb heat to help prevent services, pipes and cables from overheating.  Highly flexible, moisture resistant and feature acoustic properties.

Advantages

– No more corrosion problems due to copper pipes having contact with concrete surfaces

– Meets all regulations

– Allows for expansion and contraction of hot pipes and gives up to four hours protection

– Easy to cut; no more sawing and de-burring steel pipes

– Can be cut with a knife and off-cuts can be taped together, leaving no waste

– Will last a lifetime in-situ and will not degrade or deteriorate

Application Instructions

Mark the outline for the Firoblok sleeve on the substrate.
Cut out the hole with a powered hole cutter or padsaw and clean down edges.
Fit the Firoblok sleeve over the vent and fit to the ducting or service passing through.
Push the assembly back into the substrate until flush.

Order References / Sizes

For ventilation ducting

Ref                 Profile

110V15           110mm x 54mm

110V26           204mm x 60mm

110V29           220mm x 90mm

110V22           234mm x 29mm

110V32           308mm x 29mm

110V67           692mm x 70mm

Available in 100mm, 150mm, 200mm and 500mm lengths.