You are here:

Fire protection coating for glassfibre PVC and UPVC

Product 81

81-Fire_protection_coating_for_glass

White, fire retardant coating to achieve spread of flame to glass fibre, plastics and UPVC

Not available to purchase online.

We need to ask you a few more questions and ensure this is the suitable product for your needs.

To order please call us on +44 (0) 1 304 842 555

Contact Us »

£0.00 ex. Vat

Description

Fire protection coating for glassfibre, PVC and UPVC

A virtually odourless, fire-retardant coating for glass fibre, PVC plastics as well as UPVC. When exposed to fire or excessive heat, the coating develops an intumescent foam layer that protects the coated surface.

Ideal for the internal section of glassfibre boats, cable housings, engine housings. As well as the internal side of glassfibre sheeting.

  • Fire protection coating for glassfibre PVC and UPVC is coloured white as standard. Other colours made to order as required.  Clear coating also available.
  • Tested to EN13501-2 (2016), EN1364-1 (2014) and EN1364-1 (2015) achieving 32 minutes
  • Available in 1, 2½, 5 and 20 litre tubs.

We provide an extensive range of fireproof coatings, intumescent paint, wallpaper, and sprays compatible with a range of materials. Explore our Fireproof Coatings online.

Envirograf ® passive fire products carry the hallmark of excellence, reflecting the high standards that prevail in its laboratory, test rig, and manufacturing plant. Envirograf® passive fire products are subject to rigorous quality control which, at all stages, ensures products remain at the leading edge of fire containment technology. This quality has earned the company and its passive fire products a high reputation, with its operating system accredited to ISO9001.

Advantages

  • Fire protection coating for glassfibre PVC and UPVC is semi-flexible and water-based
  • Can be used on a range of plastics, including UPVC and glassfibre
  • Ideal for the internal sections of glass fibre boats, cable and engine housings or the internal side of glassfibre sheeting
  • Any topcoat can be applied over the top of EP/GC coating
  • Dries in 10-15 minutes

Application Instructions

Surface should be dry and grease free. Old non-bonding coating should be removed completely. Apply primer coat first if required. EP/GC Can be applied using brush or spray. Stir well before use. Apply at temperature above +10ºC and relative air humidity under 80%.
Normally applied at a rate of 2 coats at 4m² per litre per coat. Dries in two hours. Tools and equipment can be cleaned using water

Order References / Sizes

EP/GC WHITE

Ref                 Volume

EP/GC/W        1 litre

EP/GC/W        2.5 litre

EP/GC/W        5 litre

EP/GC/W        20 litre

 

EP/GC CLEAR

Clear coating is also available. Coverage approx. 3m2 per litre. This must have a top coating.

Ref                 Volume

EP/GC/C       1 litre

EP/GC/C       2.5 litre

EP/GC/C       5 litre

 

EP/GC PRIMER

Special primer to be applied to fibreglass, plastic, etc. as a bonding agent for the above coatings.

Ref                 Volume

EP/GC/P      1 litre

EP/GC/P     2.5 litre

EP/GC/P      5 litre

Related Products