You are here:

Stoveseal Sealant for Stoves

Product 115

Main-pic

High-temp sealant for use in areas where surface temperature will exceed 50°C

£0.00 ex. Vat

    • 7.7 £

Description

Sealant for Stoves

Sealant for stoves, heat-resistant sealant for stoves. A ready-mixed, ready-to-use, finely-ground putty substance that remains flexible until cured. Ideal for patching and repairs to fire-bricks, fireplaces, solid fuel ovens, ranges, boilers, also around register plates. Moreover, not to be used in permanent contact with water.

Furthermore, tested to 1250°C which is well in excess of any domestic applications.

Flue Joint Liner

Flexible liner, use in conjunction with Stoveseal or also, Silicone Sealant.

FL Protection Sleeve

Fire, thermal and acoustic protection are all incorporated into the new FL protection sleeve. Additionally, protects flue pipes, or for chemical/water pipes and cables, to keep them working for up to 2 hours in a fire situation.


We provide a varied selection of fireproof adhesives, fillers and sealants compatible with a range of materials. Browse our full range of Adhesives, Fillers and Sealants products online.


Envirograf ® passive fire products carry the hallmark of excellence, reflecting the high standards that prevail in its laboratory, test rig, and manufacturing plant. Envirograf® passive fire products are subject to rigorous quality control which, at all stages, ensures products remain at the leading edge of fire containment technology. This quality has earned the company and its passive fire products a high reputation. With its operating system accredited to ISO9001.

Advantages

– Can be used as an easy-to-clean, water and oil resistant outer surface

– For bonding and sealing between a wide range of materials such as metal, glass, ceramic, concrete, stone, clay and glass fibre

– Ideal for heat-proofing, sealing and making water-tight pipes, cables and exhausts

SIL/T – ideal for sealing gaps between flues on the back of boiler plates, amongst other applications

Application Instructions

All surfaces must be clean and dry and free from dirt, dust, grease and other contamination. Light abrasion of
the surfaces to be bonded will improve the adhesion.
Apply the adhesive from the cartridge, forcing it onto the area to be sealed, then immediately tool it down to
ensure good adhesion. Complete tooling within 5-10 minutes.
When bonding materials, apply a bead of adhesive to one surface and immediately combine the two parts,
applying pressure to ensure good surface contact.
Application equipment should be cleaned with warm water after use.
It is necessary to fully dry the product before subjecting to temperatures above 100°C to prevent gassing and
likely failure of the seal/bond. Allow to air dry for 36-48 hours, after which gentle heat can be gradually
applied.
The dried product can be removed with boiling water.

Order References / Sizes

Silicone sealant

Ref                 Size

SSC               310ml tube


FL Protection Sleeve

Ref                                       Internal Size             External Size           Length

FL165/15/150                       165 mm                           50mm Wider              150mm

FL205/15/205                      205mm                            50mm Wider             150mm

FL305/15/150                       305mm                            50mm Wider             150mm

FL165/2/200                         165mm                            50mm Wider            200mm

FL205/2/200                        205mm                            50mm Wider            200mm

FL305/2/200                        305mm                            50mm Wider            200mm