You are here:

Protector for etched or stained glass

Product 116

116-Protector_for_glass

Protective rail to affix fire rated glass in front of stained or etched glass windows

Not available to purchase online.

Please contact us on 01304 842 555 to order.

Description

A 2100mm long metal trim in standard finishes of brown or white, pre-fixed with intumescent seals. Designed to hold a sheet of fire resistant glass in front of stained or etched glass windows.

Advantages

– The protector rail will hold clear Georgian wire glass, laminated glass or ceramic fire rated glass in front of the decorative glazed panels, giving 30 or 60 minutes protection

– Can also be supplied in curved sections or arches

– Comes in brown or white as standard, but can be made to other colours as required

Application Instructions

Where decorative glass or plain glass windows require 30 minute or 60 minute fire protection,
Envirograf® have developed a metal trim to surface mount onto the risk side of the partition or
door to take Northern Wired Plain Clear – 6mm – 30 minute glass or Pilkington Clear Wired
Glass for 60 minute protection and CGI Glass.
The section as shown below is easily installed. Intumescent A is already fitted to the Stained
Glass Protector. Intumescent B needs to be fitted to the opposite side of the glass. Then the
unit needs to be fitted as below.

Order References / Sizes

Ref                  Length

GP                   2100mm