You are here:

Intumescent Gaskets (custom)

Product 30

30-custom-made-gaskets

Intumescent gaskets suitable for electrical boxes of any size

£0.00 ex. Vat

    • 4.04 £
IMG_1710-web30-custom-made-gaskets(1)

Description

Custom Intumescent Gaskets

Custom intumescent gaskets made to order. Designed to fit any socket boxes including quad boxes, combination boxes and also VRU back boxes. Electrical protection gaskets for BESA or universal boxes, where conduits pass through fire-rated ceilings and walls. BESA or universal boxes must have intumescent gaskets fitted to stop fire penetrating. Furthermore, socket boxes must have gaskets installed where they’re back-to-back. This also includes if cables pass through walls. Our extensive range of expanding intumescent gaskets and linings are ideal for a wide range of standard electrical boxes. Provides up to 4 hours of protection.

Intumescent expands when exposed to naked flames, creating a fire seal within socket boxes to prevent fires from spreading. Where sockets become faulty or overloaded, fires occur and spread rapidly. Intumescent Gaskets, also known as putty pads, provide fire and acoustic protection for socket boxes. Holes are easily cut into them to feed cables and wires through, without impairing its fire protective qualities. Simply adhered inside socket boxes housing electrical wires.

Our electrical and plumbing products meet IET wiring regulations as well as Document B & E of Building Regulations tested to European and British Standards. Browse our full range of electrical and plumbing products.

Advantages

– Solutions for both plastic and metal boxes, providing up to 4 hours protection- Compatible with single or double socket or switch boxes, BESA boxes, universal conduit boxes, ceiling roses, quad boxes, combination boxes and VRU back boxes
– Complies with IEE Wiring Regulations, bringing standard boxes in line with Document B

Application Instructions

Intumescent gaskets are essential in metal or plastic boxes where
cables pass back through a wall. Gaskets must be fitted to all dry lining boxes in
partition walls. Without these gaskets fire can spread into the partition within 4-5
minutes. Where cables run through back to back boxes in brick or block walls, flames
can pass through within 6 minutes, resulting in a wall or partition only 6 minutes of
fire integrity.
Gaskets for use inside metal or plastic boxes are made to the size of the box and
come with self-adhesive fixing on the back. Once the backing paper has been peeled
off the fixing strip, the gasket can be adhered to the inside of the box. Holes can be
cut into the gasket with a sharp knife to receive cables, or the gasket can be cut to fit
the back of the box if cables are already fitted. Dry lining boxes in walls have two
pads per box, made to size and adhered top and bottom.
Plasterboard ceiling rose boxes can be protected by means of an intumescent cover
which folds up and is passed through the hole in the ceiling. A hole is then cut in the
cover to receive the cables, which are then pulled through the cover, box and ceiling
before connecting the ceiling rose.
Ceiling rose gaskets to fit over the ceiling rose or hook plate should be fitted where
more than two cables pass through the ceiling. A hole is made in the gasket through
which the cables are passed. The backing paper of the self adhesive fixing strip is
then peeled off and the gasket is adhered to the ceiling. The pendant or light fitting
can then be fitted.

Videos

Order References / Sizes

Fire & Acoustic Protection for Quad Metal Box

 

REF                            DESCRIPTION

DPG/K1N                   Quad Metal Box 47mm deep

DPG/A/K1N              Quad Metal Box 47mm deep (acoustic)

BBG                            235mm x 140mm x 3mm

CBG/APC                   For Cooker Box

MMG/132/132           Gasket – 132mm x 132mm x 3mm

MMG/177/177            Gasket – 177.5mm x 177.5mm x 3mm

MMG/203/101            Gasket – 203mm x 101.5mm x 3mm

MMG/230/230            Gasket – 230mm x 230mm x 3mm

MMG/241/241            Gasket – 241mm x 241mm x 3mm

MMG/251/191            Gasket – 251mm x 191mm x 3mm

MMG/350/290            Gasket – 350mm x 290mm x 3mm