You are here:

Intumescent coating door upgrade kit

Product 103

103-Intumescent_coating_upgrade_fire_doors

Intumescent coating kit for upgrading a variety of door types to 30-60 minute fire doors

Not available to purchase online.

Please contact us on 01304 842 555 to order.

Description

Water-based clear or white intumescent coating kit for upgrading raised-and-fielded or flat panelled doors to fire door status. Each kit contains sufficient primer, intumescent coating and top coat to treat an area of 6m² (approximately 3 to 4 door sides, dependent on the size of the doors).

Advantages

– No need to remove any existing paints, varnish or gold leaf; this product can be applied directly over all previous coatings after normal surface washing

– Available in clear or white as standard, with a range of finishes

– Kits can be coloured to BS or RAL colours for an additional charge

Application Instructions

Because our coatings must be applied in a specific way in order to achieve the specified fire ratings, please make use of the downloadable data sheets available on the right-hand side of the page. Here, in-depth Application Instructions for the range can be found, including recommended loading rate. The Technical Information summarises the recommended usage of the coatings and contents of the kits. COSHH data is also available to download.

For any further enquiries relating to the application or specification of this product, please use the Request more information button to the right of the page.

Order References / Sizes

Ref                     Colour        Finish          

ES/RFC/WM      White          Matt

ES/RFC/WS       White          Satin

ES/RFC/WG       White         Gloss

ES/RFC/CM       Clear          Matt

ES/RFC/CS        Clear          Satin

Each upgrade kit contains the following: 0.5l primer1.5l intumescent coating0.5l top coat.