You are here:

Fire retardant coating for timber

Product 92

92-Fire_retardant_coating_for_timber

Fire retardant coating system for achieving spread of flame to timber substrates

Not available to purchase online.

Please contact us on 01304 842 555 to order.

Description

The ES/VFR and QVFR ranges offer a comprehensive solution for achieving spread of flame to timber substrates. Easily applied both externally and internally by brush, roller or spray.

ES/VFR system

The ES/VFR system is a two coat system that must have a top coat applied whether you use the white or clear this system can be used internally or externally. This coating system gives EU SBI/B/s1/do and 20 minutes fire protection.

QVFR system

Q/VFR system is a two coat system that is used for internal use only. Q/VFR comes in two colours clear or coloured giving EU SBI/B/s1/do and also 20 minutes fire protection.

Advantages

– A lasting solution for internal and external timber surfaces

– Can be used over existing paint, varnish or waxed surfaces, as well as directly on untreated timber

– Can be used on bamboo, chipboard, decorative laminates, furniture, plywood, MDF, melamine and more

– ES/VFR can be used both internally and externally

– QVFR, for internal use only, requires no top coat

– Provides UV protection for external timber

Application Instructions

Because our timber coatings must be applied in a specific way in order to achieve the specified fire ratings, we advise using the downloads available on the right-hand side of the page. Here, in-depth Application Instructions for the range can be found, arranged by individual coating, primer or top coat.

For any further enquiries relating to the application or specification of this product, please use the Request more information button to the right of the page.

Case Studies















Order References / Sizes

ES/VFR Clear system

ES/VFR Primer

A water-based primer to apply over existing paint, varnish, or waxed surfaces, before application of ES/VFR/C.

1 litre    2 litres     5 litres

ES/VFR/C Clear coating

A very hard-wearing coating which can be applied directly to new wood. For internal and external use. A top coat is required.

1 litre    2 litres    5 litres    20 litres

ES/VFR/1CS/C One-coat clear special

A clear coating, suitable for upgrading new or pre-coated timber and UPVC surfaces.

1 litre    2 litres     5 litres

ES/VFR/HARD-WEARING Top coat

A water-based top coat for use over ES/VFR/C, with no need for an undercoat. For internal use only. Finish: satin.

1 litre    2 litres    5 litres

ES/VFR/TRANSLUCENT Top coat

A spirit-based wood stain to apply over ES/VFR/C. For internal and external use. Finish: satin.

1 litre    2 litres    5 litres


ES/VFR White system

ES/VFR Primer

A water-based primer to apply over existing paint, varnish, or waxed surfaces, before application of ES/VFR.

1 litre    2 litres     5 litres

ES/VFR White coating

A very hard-wearing coating which can be applied directly to new wood. For internal and external use. A top coat is required.

1 litre    2 litres    5 litres

ES/VFR/1CS/W One-coat white special

A white coating, suitable for upgrading new or pre-coated timber and UPVC surfaces.

1 litre    2 litres     5 litres

HW ACRYLIC Top coat

A water-based acrylic emulsion for application over ES/VFR. For internal and external use. Finish: matt.

1 litre    2 litres     5 litres


QVFR Clear system

QVFR/C Clear coating

A clear, water-based coating which does not require a top coat or primer (except on oak). Dries to a satin finish as standard. If a different finish is required, or if it is liable to be damaged, it is recommended to use a top coat.

1 litre   2 litres    5 litres

QVFR/PREMIER Top coat

A clear, hard-wearing water-based top coat to apply over QVFR/C. For internal use only. Finishes: matt, satin, or gloss.

1 litre    2 litres    5 litres

QVFR/UVR Top Coat

A solvent-based top coat to apply over QVFR/C. For internal use only. Finishes: matt, satin, or gloss.

1 litre   2 litres   5 litres

Please note: QVFR/C will not take a top coat of pre-catalyst lacquer. If you wish to use a pre-catalyst lacquer, please order ES/VFR/C clear coating.


QVFR White system

QVFR/W White coating

A white, water-based coating which does not require a top coat or primer (except on oak). Dries to a matt finish as standard. If a different finish is required, or if it is liable to be damaged, it is recommended to use a top coat.

1 litre   2 litres    5 litres

QVFR/PREMIER Top coat

A clear, hard-wearing water-based top coat to apply over QVFR/W. For internal use only. Finishes: matt, satin, or gloss.

1 litre   2 litres    5 litres

QVFR/PREMIER PLUS WHITE Top Coat

A white or coloured water-based top coat to provide an excellent finish over QVFR/W. For internal use only. Finishes: matt, satin, or gloss.

1 litre   2 litres    5 litres

QVFR/EASY CLEAN Top Coat

A water-based top coat for use over both QVFR/W and ES/VFR. Very robust and can be scrubbed or hosed.  Apply 1 coat for cleaning down regularly or 2 coats for scrubbing down. For internal use only.

Please note: QVFR/W will not take a top coat of pre-catalyst lacquer. If you wish to use a pre-catalyst lacquer, please order ES/VFR white coating.


ENV/HS System

ENV/HS High-density clear lacquer

A high-density, robust lacquer for use in areas subject to hard wear, such as flooring or stairs. Can be used as a top coat over both ES/VFR and QVFR coating systems.