You are here:

Fire Protection for Air Con Units

Product 31

31-acoustic-tent-cover

Fire and smoke resistant covers to be fitted over light fittings and air conditioning units

Not available to purchase online.

We need to ask you a few more questions and ensure this is the suitable product for your needs.

To order please call us on +44 (0) 1 304 842 555

air-conditioning

Description

Fireproofing Air Conditioning Units

Impregnated with fire-resistant material and fixed over air conditioning units which are recessed into fire-rated ceilings. Fully ventilated to prevent units from overheating, providing effective fire as well as acoustic protection. Newly fitted either during installation or retrofitted to existing air conditioning units. Its simple design makes it easy to fit over air-con units by one person within minutes.

A staple for most office buildings, air conditioning units become overheated when excessively used or poorly maintained. Due to the location of installation, ceilings become impaired by excessive heat, with fires able to cause inflicting damage to multiple rooms quickly. According to LFB, overused air conditioning units are a leading cause of fire during summer periods.

Installing passive fire products for electrical services provides multiple benefits. Such benefits include compartmentalising fire, preventing fire spread and preserving building structures. The impregnated material will contain the fire, allowing occupants to safely evacuate a building and for fire rescue services to extinguish flames before they become severe.

Tested to BS476 Parts 20-23 achieving 88 minutes integrity. As part of this range, see also air conditioning covers.


Our electrical and plumbing products meet IET wiring regulations as well as Document B & E of Building Regulations tested to European and British Standards. Browse our full range of electrical and plumbing products.

 

Advantages

– Provides acoustic protection and up to 88 minutes integrity- Designed for use with fluorescent light fittings and air conditioning units which are recessed into fire rated suspended or plasterboard ceilings
– Easily installed by one person in minutes
– Can be fitted during the installation process, or retrofitted to existing air conditioning units and light fittings

Application Instructions

Lay the tent out flat on its back and thread the rods supplied through the centre hole.
With the tent laid out, turn it to its upright position and insert rod ends into the corresponding pockets located at each corner of the tent.
Place the tent over the light fitting and fit the cable through the ventilation hole, connecting to the light fitting according to the manufacturer’s instructions.
Pull the material away from the fitting over the T-bar at each corner and fix the material to the T-bar with the supplied clips. Pinch each clip with a pair of pliers to fix tightly.
For larger tents (FT4 and up), follow the above procedure, but be sure to fix in place where the tent lies over the T-bars with supplied clips.

Case Studies


Order References / Sizes

REF                                SIZE                                                               RATING                                                                         

FT1                                 0350mm x 300mm x 150mm                   1 hour

FT2                                 0650mm x 600mm x 150mm                   1 hour

FT21                               0650mm x 300mm x 150mm                   1 hour

FT4                                 1250mm x 600mm x 150mm                   1 hour

FT41                               1250mm x 300mm x 150mm                   1 hour

FT5                                 1550mm x 600mm x 150mm                   1 hour

FT6                                 1850mm x 600mm x 150mm                   1 hour

FT61                               1850mm x 300mm x 150mm                   1 hour

ACOUSTIC

 

REF                                SIZE                                                               RATING                                                                               

FT1/AC                          0350mm x 300mm x 150mm                   1 hour

FT2/AC                          0650mm x 600mm x 150mm                   1 hour

FT4/AC                          1250mm x 600mm x 150mm                   1 hour

FT41/AC                        1250mm x 300mm x 150mm                   1 hour

FT5/AC                          1550mm x 600mm x 150mm                   1 hour

FT6/AC                          1850mm x 600mm x 150mm                   1 hour

FT61/AC                        1850mm x 300mm x 150mm                   1 hour

 

Price includes patches and adhesive for rods and pipes