You are here:

Fire protection coating for PVC electrical cables

Product 80


White intumescent coating for PVC cables, which dries to a flexible finish

Not available to purchase online.

We need to ask you a few more questions and ensure this is the suitable product for your needs.

To order please call us on +44 (0) 1 304 842 555


Water-based, odourless, white intumescent fire-resistant coating for cables with plastic casing. Prolongs the functions of the cables in the event of a fire, thus providing effective fire protection.


– Has no damaging effect on working cables and will not cause them to overheat from everyday use- Inhibits PVC fumes in the event of a fire
– After application, the coating allows some flexibility without cracking – ideal for cables which require regular maintenance
– Can be easily applied by brush or spray

Application Instructions

Ensure surface is dry and grease free. Old peeling paint should be removed completely before
Stir well before use. Product can be applied using brush or spray. Please observe basic rules for
working with paints. Apply at temperatures of over 10ºC and a relative humidity of under 80%.
Each litre covers approximately 1m² of bunched cables or approximately 20m of 25mm diameter cable.
Up to 10% water dilution allowed when spraying but ensure correct loadings are applied to area to give
maximum fire protection – please contact the technical department for further information.
Drying time: Dries in approximately 1 hour. Thoroughly dry after 24-48 hours depending on the
temperature of the surrounding

Order References / Sizes

EP/C                       1 litre