You are here:

Intumescent Paint for Wood (HW System)

Product 42

42 with CE mark

Intumescent paint for wood and timber products including doors.

Not available to purchase online.

We need to ask you a few more questions and ensure this is the suitable product for your needs.

To order please call us on +44 (0) 1 304 842 555

Contact Us »
ce-mark-vector42-Intumescent_Coating42-Intumescent_Coating242-Intumescent_Coating342-Intumescent_Coating442-Intumescent_Coating542-Intumescent_Coating6

Description

Intumescent Paint for Wood

A range of clear and white intumescent fire-resistant paint for wood. Giving protection to various wood and wood-derived materials. Ideal for painting or upgrading existing wood or timber surfaces to either 30 or 60 minutes of fire protection. This paint is especially suitable for use on insulation board, MDF board, plasterboard, wood, and some wood-derived products.

There is no need to strip off the existing paint or varnish because Envirograf adhesion primer is also available. See our references tab for full details of products in this range. Paint application using a brush, roller, or spray. Additionally, this range provides UV protection for external timber surfaces.

All types of new and old doors, some over 200 years old, have undergone testing. As a result of the coating, their fire resistance was upgraded to an integrity of over 60 minutes. Furthermore, the HW range can also upgrade wood panelling to 30 or 60 minutes fire rating. (Depending on the type and thickness of wood.)

Also, open joists and floorboards have achieved 60 minutes of fire protection on a loaded floor. Timber mouldings and carcasses have achieved 90 minute fire rating. A range of timber types, including MDF and plywood also underwent testing.

  • CPR (Certificate of constancy of performance) 1220-CPR-2370 & 1220-CPR-2371
  • EPD (Environmental Product Declaration)  HUB-1049
  • CE MARK, ETA (European Technical Assessment) ETA 23/0388 & ETA 23/0389

We provide an extensive range of fireproof coatings, intumescent paint, wallpaper, and sprays compatible with a range of materials. Explore our Fireproof Coatings online.

Advantages

– A lasting solution for internal and external treated or untreated wood- Can be used on insulation board, MDF board, plasterboard, timber and a wide variety of wood-derived products, including doors, flooring and furniture
– Perfect for upgrading existing wooden doors to 30 or 60-minute fire doors – no need to replace them!
– With the use of our primer, coatings can be applied on painted or varnished surfaces with no need to strip them beforehand
– Provides UV protection for external timber surfaces

Backed by more than a century of proven safety science expertise, businesses, consumers and regulatory authorities around the world recognise the trusted rigour and technical excellence of U L certifications.

Application Instructions

Because our timber coatings must be applied in a specific way in order to achieve the specified fire ratings, we advise using the downloads available on the right-hand side of the page. Here, in-depth Application Instructions for the range can be found, arranged by individual coating, primer or top coat. The Technical Overviews summarise the recommended usage of the coatings, including spreading rate and drying times. COSHH data is also available to download.
Please contact our technical team for any further enquiries relating to the application or specification of this product.

Case Studies

  • Ace results for Cherrywood

    Door upgrading products used in  Paladian style Stanmer House in East Sussex.

  • Beach huts and cabins protected against arson

    Flame retardant and fire protection coatings used to protect beach huts at Tankerton seafront.

  • Fighting arson with help from Envirograf®

    Lincolnshire Council uses HW Coating System to protect wooden structures from arsonists.

  • A Quality Finish at Kilworth House Hotel

    Range of passive fire protection products used at Kilworth House Hotel.

  • Perfect Partners at Gosfield Hall

    Door fire protection products used at Gosfield Hall, Essex

  • Priceless protection at Thornham Parva Church

    Protecting the unique oak retable at Saint Mary’s Church.

  • Singing the Praises of Excellence

    Intumescent coatings used to protect Westminster Choir School.

  • Talking Business at Colchester Campus

    Intumescent coatings protecting timber frame structure of the new Business School in Colchester, University of Essex.

  • The Envirograf® Cure

    JNR Tower Curing works conversion to Time & Tide Museum.

  • Fire protection for barn conversion

    Intumescent coatings helping to conform to current fire regulations.

  • Canary Wharf Crossrail Station

    Intumescent coatings are used to provide fire protection to timber and steel construction.

Videos

Order References / Sizes

WHITE SYSTEM

HWAP/WB Primer – 1 litre, 2½ litres, 5 litres

A water-based product to apply over existing paint, varnish or wax surfaces, before applying other coatings.

 

HW EBONY BLACK Top Coat – 1 litre, 2½ litres, 5 litres

A solvent based product. FINISH: SATIN. For INTERNAL & EXTERNAL use

 

HW01/F White intumescent Coating – 1 litre, 2½ litres, 5 litres, 10 litres, 20 litres

HW01FLEX is a water-based product that MUST have a protective Top Sealer Coat applied. Once coated, HW01F will last the life of the Top Coat. If the Top Coat is re-applied at the end of the cycle, HW01F will continue to offer fire protection for life. For INTERNAL & EXTERNAL use.

 

HW04 UNDERCOAT WHITE – Water-based – Internal Only – 1 litre

 

HW04/S UNDERCOAT WHITE – Spirit Based – Internal & External use – 1 litre, 2½ litres, 5 litres

 

HW EXCEL WHITE Top Coat – 1 litre, 2½ litres, 5 litres

A solvent-based product to apply over HW01F – no need for UC.  FINISH: MATT/SATIN/GLOSS. For INTERNAL & EXTERNAL use.

 

HW ULTRA WHITE Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres, 20 litres

A water-based product to apply over HW01F – no need for an Undercoat. FINISH: MATT/SATIN/GLOSS. For INTERNAL & EXTERNAL use.

 

HW ULTIMATE WHITE Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres, 20 litres

A water-based product, but HWAP/WB Primer must be applied over the HW01F first. FINISH: SATIN. For INTERNAL & EXTERNAL use. White or Coloured.

 

HW SUPERB WHITE Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres

A water-based product to apply over HW01F – no need for an Undercoat. FINISH: GLOSS. For INTERNAL & EXTERNAL use. White or Coloured.

 

HW EASY CLEAN Top Coat – 1 litre, 2½ litres, 5 litres

A water-based product to apply over HW01F, very robust, can be scrubbed or hosed. Apply 1 coat for cleaning down regularly or 2 coats for scrubbing down. FINISH: 10% MATT 30% SATIN. For INTERNAL use.

 

HW ACRYLIC WHITE Top Coat – 1 litre, 2½ litres, 5 litres

A Water-based Acrylic emulsion product. FINISH: MATT. For INTERNAL & EXTERNAL use.

 

ANTI-GRAFFITI COATING – 1 litre, 2½ litres

HW/AG is a clear, quick-drying coating which protects against graffiti of all kinds and, when used in conjunction with Envirograf® fire protection coatings, offering BS476 Class 0 and Class 1 spread of flame. It can be cleaned repeatedly without special chemicals. Supplied in a single pack and available in matt or gloss finishes. Excellent adhesion to concrete, brick, stone, render, timber, metal, cladding, and most previously-sealed surfaces (use on masonry paint should be patch-tested first for adhesion). Short drying and recoating times mean that rapid protection can be achieved. As HW/AG is clear, the surface must be decorated as required before coating with HW/AG.

 

CLEAR SYSTEM

 HWAP/WB Primer – 1 litre, 2½ litres, 5 litres

A water-based product to apply over existing paint, varnish or wax surfaces, before applying other coatings. For INTERNAL use.

 

HW02N Clear intumescent Coating – 1 litre, 2½ litres, 5 litres, 10 litres, 20 litres

Water-based clear intumescent coating for all wood/related products. Tested to BS476 Parts 6 & 7 (1987) (Class 0 & Class 1), EN13501 (Classification A1-B/S1/d0) plus BS476 Part 22 (1987) and EN1364-1 for 30/60 minutes integrity/insulation/stability, dependent on wood thickness. This product requires use of top coat.

 

HW05 Clear Solvent-Based Hard-Wearing Top Coat for use over HW02N – 1 litre, 2½ litres, 5 litres

This is a specially-formulated clear coating for use on timber floors, walls, doors, bar tops, etc., where they are liable to knocks or damage. For internal use only. Applications by brush or spray.

Matt (10% sheen) and Satin (30% sheen)  Gloss (90% sheen)

 

ENV/HS High-Density Clear Lacquer – 1 litre

For use over HW02E, ES/VFR, or QVFR.  FINISH: MATT/SATIN/GLOSS.

 

HW ENVIRO CLEAR Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres

A water-based product to apply over HW01, HW02E, and Product 92 range.  FINISH: SATIN/GLOSS. For INTERNAL use.

 

HW EXCEL CLEAR Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres

A solvent based product to apply over HW02E – no need for an Undercoat.  FINISH: MATT/SATIN/GLOSS. For INTERNAL use.

 

HW ULTIMATE CLEAR Top Coat – 1 litre, 2½ litres, 5 litres

A hardwearing water-based product to apply over HW02E – no need for an Undercoat. Ideal for use on doors or floors.  FINISH: MATT/SATIN. For INTERNAL use.

 

HW SUPERB CLEAR Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres

A solvent-based product with basic UV protection to apply over HW02E – no need for an Undercoat.  FINISH: MATT/SATIN/GLOSS. For EXTERNAL use.

For EXTRA UV protection above the standard level, state “extra UV protection” on your order and add 10% to the price.

 

HW TRANSLUCENT Top Coat – 1 litre, 2½ litres, 5 litres

A satin solvent based wood stain to apply over HW02E for INTERNAL & EXTERNAL USE.

 

HW/CRC Chlorinated Rubber Top Coat – 1 litre, 2½ litres, 5 litres, 10 litres

A Chlorinated Rubber Top Coat, for use over HW01F (white) or HW02E (clear). FINISH: GLOSS, For use over HW02E, 2 coats must be applied at 8-10m² per litre, per coat.

 

HW/PS Paint Stripper – 1 litre, 2½ litres, 5 litres

Where existing paint or varnish needs to be removed before applying Envirograf® Fire Protection. Easy use – wash off with water.

 

HW/C Cleaner & Degreaser – 1 litre, 2½ litres, 5 litres

A cleaning liquid to gently remove grease, wax, cigarette stains, etc., before applying Envirograf® Fire Protection. Can be diluted with 20% water (if required).

 

test

Related Products